Wednesday, December 28, 2022

Thank You Card with Layered Chickadee

Hello crafty friends! I hope your holidays have been good! After all of the glitzed up cards of the holidays (which truthfully are my favorite-LOL) I'm sharing a more clean and simple thank you card featuring the Chickadee in the beautiful Lovely Layers: Winter Birds Honey Cuts by Honey Bee Stamps.

First I stamped the sentiment from the Inside: Thankful Sentiments set with black ink. The piece of 80# Neenah is A2 sized. I stamped the sentiment near the bottom in order to partially emboss it with the Kaleidoscope 3D embossing folder. You just place your card into the embossing folder with the stamped edge hanging out. Once you have it straight, then run it through your die cutting machine! I adhered it to an A2 card base with Bee Creative glue.

I die cut the branch and two leafy sprigs from the Lovely Layers: Winter Greenery from 80# Neenah.  Then I used Walnut Stain, Mowed Lawn, and Rustic Wilderness Distress Oxides to color them with detail blender brushes. I adhered the branch with glue, clipped apart the greenery and glued the pieces in place.

Next I die cut the pieces of the Chickadee from the Lovely Layers: Winter Birds. I used 80# Neenah and black cardstock. Then I quickly blended on some Weathered Wood and Scattered Straw Distress Oxide inks. Here's a photo for you to see what the individual pieces look like:

I used glue to adhere the chickadee layers and adhered it to my card with some foam squares. I added pearls from the Warm Pearls pearl sticker set to the branch for a bit of bling.

I hope I've given your some ideas for your thank you cards! I'll definitely be keeping these Winter Birds out to use year round (we have cardinals and chickadees all the time where I'm at). Thank you so much for stopping by today! See you next year!!

Tuesday, December 27, 2022

Wintery Thank You Card with Patterned Paper

 Hello crafty friends!  I hope your Christmas was a good one and that you got some crafty goodies from your wish list!  LOL!  Today I'm sharing a winter thank you card featuring Rubbernecker Stamps beautiful Wintery Woodlands paper pad and the Wintery Friends set.

This was a super easy and quick card to make, so I'll keep it simple here!  All of the supplies I used are listed and linked at the end.

First I die cut my card layers: patterned paper from the Wintery Woodlands with a stitched rectangle die; two ovals with a stitched oval die; and one oval one size smaller than the previous two.

I inked up the smaller die cut oval with Arctic and Sky ink from the Color Fuse Set #7.

Then I took the second of the two die cut ovals and placed a Slimline Hills Die near the bottom and ran it through my die cutting machine.  This is an easy way to create a coordinating hill!  I added a bit of Snowfall Grit paste to the edge of the hill and let it dry.

Next I stamped the bear with Copic safe ink and colored him adding white details to the scarf with a white gel pen.  I took my coloring inspiration from the bears on the patterned paper!  I used the coordinating die to cut him out.

I diluted some white gouache with water and added splatters to the inked oval, the hill, and a few to the bear.  I assembled all of the layers and bear using glue and foam tape.

The sweet sentiment from the Wintery Friends set is stamped with black ink and trimmed with scissors.  I popped it up with foam tape too.

I think this little bear is just so adorable!  Thank you so much for stopping by today!  I always appreciate the fact that you take a bit of time to check out my blog posts!  Have a safe and happy New Year's Eve!

These are the supplies I used and most are affiliate links (never any additional cost to you).

Wednesday, December 21, 2022

Altenew: A Year In Review: Crafters' Edition Blog Hop + Giveaway

Hello crafty friends!  I have been so honored to have had the chance to guest design for Altenew this year, and I'm so thrilled to be participating in the Year In Review blog hop!  And there are some awesome prizes--keep reading for the details!

We were to choose four of our most favorite Altenew projects from 2022, and let me tell you, that wasn't easy!!  There is lots of gorgeous inspiration in this hop and I have the complete hop lineup listed below.  If you would like to start from the beginning, head over to the Altenew card blog.  You should have arrived here from the blog of Karen Reátegui!

Now onto my four favorite Altenew cards!

This card featuring the Craft-A-Flower: Cape Marguerite die set is by far my most favorite card I made for 2022!  I just love how the dimensional flowers just pop off of the dark blue background that was embossed with the Angled Mosaic 3D embossing folder!  Check out all of the details of this beautiful card on this blog post.

Next up is the card I made using the gorgeous Bountiful Bouquet stamp set and coordinating dies.  I absolutely love the colors of the Sweet Dreams ink cube set!  See all of the details on my blog post.

This card features the beautiful Build-A-Garden: Magnificent Branch stamp.  I could have created two cards from this beauty, but I just wanted to feature the entire image on one card.  This blog post has all of the details of my coloring.

I created these two cards from one panel where I used the embossing folder that was in the Craft Your Life: Seasonal Blooms Project Kit.  After I colored the gorgeous image, I cut it in two to make the cards.  Check out the details HERE.



Be sure to leave a comment here on my blog before you head over to the awesome blog of Bobby Hagen!

Prizes:

Over $500 in total prizes! Altenew is giving away a $100 gift card to 1 lucky winner, 3 $50 gift cards, and 27 $10 gift cards. Winners will be chosen from both blog hop #1 and blog hop #2. Please leave a comment on the Altenew Card Blog HERE by 12/27/2022 for a chance to win.

Wait, there's MORE!

 

We would also LOVE to see YOUR favorite handmade cards, layouts, home decor, etc. featuring Altenew products! Feel free to share them on social media or on your blog using the hashtag #AltenewBest2022. You may also add a link by clicking the blue button below.

 

FOUR lucky crafters will each win a $15 gift certificate to our store! Winners will be announced on the Altenew Winners Page on 12/29/2022. We are looking forward to seeing your beautiful creations!


Blog Hop Order:

Altenew Card Blog

Erin Thompson

Annemarie Caister

Seeka

Karen Brown

Claire Apostoloff

Mindy Eggen

Fiona Duff

Karen Reátegui

Carol Hintermeier

Bobby Hagen

Michelle Short

Lorena Brougher

Michelle Burnier


Sparkling Winter White Poinsettias Card

Hello crafty friends! Today I'm sharing my monochromatic winter card that features the Lovely Layers: Poinsettia Honey Cuts with lots of gorgeous sparkles! I love adding sparkles to cards anytime I can get away with it! Haha!

For the card base, I used a Detail Blender brush to add Stormy Sky Distress Oxide just around the edges of the folded card base. Then I used one of the papers that comes in the current "FreeBee" paper pack (free with a qualifying purchase). I used Bee Creative glue to adhere it to the card base.

Next I die cut the Lovely Layers: Poinsettia and Lovely Layers: Winter Greenery (pine sprigs, branch, and berries) from 80# Neenah. To add the sparkle to the poinsettia, I used an embossing dabber and swiped it along the edges of the petals. Then I added some embossing powder that I've had in my stash forever (and I just learned it is now discontinued) but I think that this sparkly gold embossing powder would be beautiful too.  I also linked a few at the end of my supply list below that would be very pretty!  I heat set the powder and repeated the steps for each layer of the poinsettia. I used glue to adhere the layers together.

Before I embossed the leaves and berries, I colored them with some Stormy Sky Distress Oxide using a Detail Blender brush. I repeated the embossing steps. My reverse tweezer made this easy and also protected my fingers from the heat!

I quickly colored the twigs with a blender brush and some Brushed Corduroy Distress Oxide.

I arranged the poinsettia and other die cuts on my card. I used a piece of Press N Seal to pick up all of the stems and branches to add glue to the back. Then just replace the Press N Seal to adhere the die cuts to the card. I added glue to the poinsettia to adhere it. Then I tucked in the leaves with some glue. To add more dimension, I used my fingers to slightly shape the twigs, sprigs, and leaves.

Next I colored a scrap of white cardstock with Stormy Sky Oxide. Then I brushed it with my anti-static tool and stamped the sentiment from the Home For The Holidays stamp set with clear embossing ink. I added white sparkle embossing powder and heat set it. Then I used the coordinating Honey Cut to die cut it out. I popped it up with a few foam squares.

I added a few gem stickers from the Winter Wonder gem sticker set to the center of the poinsettia.

I so wish cameras would pick up the gorgeous sparkle! It's so pretty in real life. If you celebrate Christmas, I wish you the happiest of holidays! If not, have a wonderful day, and I'll see you next week after Christmas! Thank you so much for stopping by--you are so appreciated! 

Thursday, December 15, 2022

Simon Says Stamp Hugs Release!

Hello friends!  It's release day over at Simon Says Stamp and there are SO many awesome new crafty goodies in the Hugs Release!  I'm sharing my card with heat embossing and a vellum overlay that features the oh, so sweet A-Glazing stamp set!  Check out the details of how to make this below!

 First I stamped the images with clear embossing ink randomly onto Neenah Desert Storm cardstock and heat set them with white embossing powder.

Then I trimmed a piece of vellum to 5-¾" x 4-½".  I scored and folded the vellum at ¼" and adhered the narrow folded strip to the back of the embossed panel.  Next I adhered the piece to an A2 card base.

I stamped the heart cookie with Copic safe ink and colored it with a few Copic markers.  I fussy cut it out and added foam tape to the back.  I stamped the sentiment from the A-Glazing Day stamp set with Versafine Onyx black ink on a strip of white cardstock.  

Before I adhered the stamped strip to the card I wrapped a piece of pink gingham ribbon around it.  Then I used double sided tape to adhere it to the card.

This card was super easy and quick to make, but looks so pretty and sweet!  Be sure to check out lots more inspiration and see the entire Hugs release over at Simon Says Stamp.  Thanks so much for stopping by!

Thank you for using my affiliate links to shop (never any additional cost to you).

Wednesday, December 14, 2022

Cold Noses, Warm Heart - Winter Friend Card

 Hello, crafty friends! Today I'm sharing my looks-like-a-shaker-card, but it isn't card! I've used the new Polar Pals stamps and Honey Cuts and placed them in the Snow Globe A2 Shaker die on a 5" x 7" card. With the sentiments I used on the outside and inside of the card, this is just perfect to send a paper hug to that special someone!

Let's begin from the card base upwards:

  • Cut a piece of the patterned paper from the Make It Merry paper pad to 5" x 7".
  • Adhere it to an A7 card base.
  • Stamp the sentiment from the Inside: Kindness set on the inside of the card in black ink.
  • Next die cut the pieces of the Snow Globe A2 Shaker Honey Cuts from 80# Neenah.
  • Die cut the frame three times and layer together with glue.
  • Die cut the base from dark gray cardstock.
  • Next stamp the sentiment from the Polar Pals stamps onto the gray base in clear embossing ink and heat set with white embossing powder. Adhere to the snow globe with glue.
  • Ink blend Tumbled Glass, Faded Jeans and Chipped Sapphire Distress Oxide inks onto the center piece of the snow globe.
  • Die cut the ink blended piece with the Snow Day Cover Plate die.
  • Then die cut two hills using the Horizon Slimline Borders Honey Cuts from white glitter cardstock.
  • Trim them with scissors to fit the bottom of the inked snow globe center piece.
  • I adhered one with glue and popped up the small hill with some foam tape.
  • I assembled the snow globe and adhered it to the card base with glue.
  • Next I stamped the polar bear and penguins from the Polar Pals set in Intense Black ink. I used a few Copic markers to color them and then cut them out with the coordinating Honey Cuts.
  • Next I die cut the Pine Trees Honey Cuts and two pieces of pine sprigs from the Lovely Layers: Winter Greenery. I used an ink blending brush to color them with Mowed Lawn and Rustic Wilderness Distress ink.
  • I splattered the pine trees with diluted white paint and adhered all of the pieces to the snow globe with glue and foam squares.
  • I die cut the bow from the Grapevine Wreath Honey Cuts from white glitter cardstock.
  • I splattered the pine trees with diluted white paint and adhered all of the pieces to the snow globe with glue and foam squares.

I just adore the sweet Polar Pals set!! So did I succeed in making my pretend shaker card kind of look like a shaker? I think it works and hope you do too! Thank you so much for stopping by today. You are always so very appreciated!

Thank you so much if you use my affiliate links to shop (never any additional cost to you).

Tuesday, December 13, 2022

Snowflake Stenciled Winter Thank You Card

Today I'm sharing my wintery thank you card with Rubbernecker Stamps beautiful Snowflake Stencil and Thanks Word with Shadow die!  Other than the time for my texture paste to dry, this card came together very quickly!

First I placed the Snowflake Stencil over some 110# Neenah white cardstock.  I spread Frostbite Nuvo Glacier paste through the stencil with a pallet knife.  I spread a bit more of the paste on some scrap cardstock in an area large enough for the Thanks Word die.  I set these aside to dry and cleaned up my tools.

I die cut a Nested Rectangle Scallop die from 80# Neenah and added foam tape to adhere it to an A2 card base.

I die cut the dry stenciled panel with a Nested Rectangle Small Stitch die and adhered it with glue.  I just LOVE the shine of the Glacier Paste!!!

The Thanks Word die sentiment shadow is die cut once from white cardstock. I die cut the work three times from white cardstock and also from the Glacier Paste piece.  I adhered these together with glue and added them to stitched and scalloped die cut ovals.

For a touch of bling I added some sequins and snowflakes I had in my stash here and there on the card!

I really think this is one of my most favorite thank you cards!!!!  Thank you so much for stopping by!!

Thank you if you choose to use my affiliate links (never any additional cost to you).