Sunday, June 14, 2020

Sea-ing You Brightens My Day! | Rubbernecker Stamps

Happy Sunday my friends!  Oh my gosh the expressions on these adorable fish make me have such a big smile!!  These fun fish with an attitude are from the Rubbernecker Stamps Fish Group stamp and they have a coordinating die too!  I also have a couple of tips to show you how to make your own coordinating ribbon, add extra detail to your stamped images, and how to get more use from of your dies.  Keep reading for these easy tips!



Let's create the ocean background:
  • Ink up white card stock in a blue ombré pattern.  I used an ink blending brush and Distress Oxide inks in these colors:  Blueprint Sketch, Salty Ocean, and Mermaid Lagoon.
  • I used a "rays" stencil and inked some white pigment ink over the ombré panel.  Before removing the stencil, I spritzed some glitter spray over it and set it aside to dry.
  • When the panel is dry, adhere it to an A2 card base.
  • Ink up two strips of white card stock in the same colors for the waves.  Die cut these with two of the dies from the Waves die set.  Offset them and adhere together.
  • Die cut the ombré panel with the largest Nested Inside Scallop die.
  • Using the same Nested Inside Scallop die, place the waves at the bottom and die cut it.  This will give you the same edge as the ombré panel.  See this next photo for more explanation. This is one way to use your dies in a less conventional way!
  • Pop up the waves with some foam tape and adhere it to the card base.




Read on for another way I used my die differently for the sentiment:
  • I stamped the sentiment from the Under The Sea set in black ink on a piece of white card stock.
  • Place the smallest Nested Tag Stitch die, and the included hole die, over the sentiment and die cut it.
  • Now move the die up to cut the bottom edge. (Second photo)
  • You can feel the stitches from the die align with those on the card stock.  Run through your die cutting machine.  Here are a couple of photos for a visual explanation:
  • I inked up another piece of card stock with the Distress Oxides and trimmed it to layer behind the tag.
  • Next I dyed some ribbon from my stash to coordinate.  More photos are below to show you the process.  Smoosh the inks onto your mat, spritz with water, and gently swirl the ribbon in the ink.  The more water you spritz, the more diluted the ink will be and the lighter your ribbon will turn out.  Set it aside to dry.
  • When the ribbon is dry, loop it through the hole and tie some bakers twine in a bow.
    




Now onto adding a few details to your stamped images and finishing up the card.
  • I stamped the fish from the Fish Group set and a couple plants from the Under The Sea set in Copic safe ink.  I LOVE how the four fish are on one stamp and the one die cuts them all out together!  Makes it so easy!  The coordinating die sets are Fish Group 895-27D and Under The Sea 3109D.
  • Next, I added some stripes and dots to two of the fish.  For the striped fish, I penciled in the stripes, erasing and fixing them until I was satisfied.  I used a .05 black Micron pen to trace over the pencil lines.  I colored the fish and plants with my Copics.
  • Then I used the same pen to add dots in the shadows of the orange fish.  It's a subtle detail, but makes a big difference!


  • I popped up three of the fish and the sentiment tag with foam tape and adhered them to the card base.
  • I used liquid glue to adhere the other fish and plants.
  • I used Distress Collage Medium Matte adhesive to glue the clear acrylic droplets.


I hope you've enjoyed my tips and that this card makes you smile like it does me!  Thank you so much for stopping by!  Have a fabulous and crafty week!



Thursday, June 11, 2020

Beep! Boop! You Light Up My Life! | Honey Bee Stamps

Today I have a fun light-up card using the adorable Honey Bee Stamps Build-A-Bot set!  Have you ever made a light-up card?  These Pear Blossom Press EZ-Lights make it so easy! Keep reading to see how to make this fun card.

This is the card as you would see it out of the envelope.



Push where it says "press here" and ta-da!


Here are the steps I took to make my card.  I hope this makes it easy to understand!
  • Die cut Neenah Solar White card stock with the largest A2 Double Stitched Frames die.
  • Create the galaxy background by blending Distress Oxide inks on the die cut panel.  I used Picked Raspberry, Blueprint Sketch, Mustard Seed, and Black Soot.  The blending brushes make this so easy!
  • I used an ink blending tool to add some Distress Micro Glaze to the inked background and used a paper towel to wipe off the excess.  I love how this enhances the colors and also takes away the chalky look of the Oxide inks.
  • I used the Twinkle, Twinkle stencil and some texture paste to add the stars to the background stencil, sprinkled on some glitter, and set it aside to dry.  When it was dry, I adhered it to a pink card stock layer.
  • I used stamps and dies from these sets for the scene on my card:  Build-A-Bot, Far Out Friends, Gear Up, and One-Of-A-Kind (for the press here).
  • The Bot pieces were colored with Copic markers and the moon with Distress Oxides using the To The Moon Scene Builder stencil set.  Distress Oxides for the moon are Weathered Wood, Black Soot, Festive Berries, Picked Raspberry and Spun Sugar.
  • I used a craft knife to cut out the grid in the middle piece for the Bot.  I stamped that piece again, this time on vellum, with StazOn black ink.  I colored the back of the grid with Copics, die cut it, and adhered it to the back of the Bot middle.  Now I can adhere the Bot pieces together with glue.  See first photo below.
  • I planned out where to place my pieces to know where to add three holes for the lights and marked the spots with a black marker.  I used a craft pick to punch the holes.  Align the panel over the card base and use a pencil to mark the spot for the lights through the punched holes.  See the next photos for the lights, battery pack, and foam tape placement.  I used double-sided adhesive to hold the battery pack in place.
Click the photos to see larger images.

  

Once I double-checked that I had the lights in the correct spot, I removed the foam tape backing and adhered the galaxy panel.  Now it's just a matter of adding foam tape to your pieces and adding them to the card!


I could play with this card all day!  Haha!  I hope I've inspired you to play with this fun Build-A-Bot set and add some lights for more fun!  Thank you so much for stopping by!


Supplies:
Honey Bee Stamps:

Other:
Distress Oxide inks:  Spun Sugar, Picked Raspberry, Festive Berries, Weathered Wood, Black Soot, Blueprint Sketch, Mustard Seed

I Find You "Ribbiting!" | Art Impressions

Hello friends!  It's week two of the Animals and Nature Challenge over at Art Impressions.  For my inspiration card today I'm using the oh, so adorable Frog Set!  The frogs in this set remind me of the cute green tree frogs in my backyard!


I used a Rectangle Double Stitched die to cut a piece of 80# Neenah Solar White card stock.  I stamped the frog and the tulip stamps onto some masking paper and fussy cut them out.  I stamped the frog first onto the card panel and then applied the mask.  Now I can stamp the tulip and it will be behind the frog!  I left the masks on both stamped images for the next step.  I used an oval masking stencil and a grass stencil to ink on some Distress Oxide inks.  I used an ink blending brush with Tumbled Glass and Mowed Lawn inks.  To create a grass stencil, I used a Grass Border die and die cut some masking paper.


I colored the images with the Copic markers listed below and stamped the sentiment in black ink.  I  added foam tape to the back of the panel.   I die cut some striped paper with the largest Rectangle Double Stitched die and adhered it to an A2 card base.  For a bit of bling, I added some Dandelion Yellow Nuvo Crystal Drops.


This set is SO adorable and has several other sentiments and cute frog images!  Thanks so much for stopping by!  I hope to see your entry into the Animal and Nature challenge over at Art Impressions!

Copic markers:
G28, G46, G24, G21,
YG17, YG25, YG03, YG01
Y19, Y15, Y13, Y11

Supplies:

Monday, June 8, 2020

Birthday Cake Twist Set with No-line Coloring | Art Impressions

Happy Monday friends!  Well, I went WAY outside my comfort zone to create this card using the beautiful Cake Twist Set by doing some no-line coloring!


I created my A2 card and added some patterned paper that I die cut with a die from the Rectangle Double Stitched die set.  Then I die cut the Twist Frame Die on the card front.  I stamped the cake images onto Neenah Solar White 80# card stock in some light colored ink.  While you can still see the stamped images, the lines disappear and blend into your colors.  My Copic colors are listed below.  When I finished coloring, I die cut the cakes with the dies included with the stamp set.  I also added some Ripened Pumpkin Nuvo Crystal Drops to the flower centers and clear sparkle to the cake icing.


It's so cool how the two cake images are mirror images!  All you need to do next is to adhere them back to back.  It's very easy to now slip it into the die cut frame.


I stamped the sentiment and trimmed it into a banner shape along with a yellow banner-shaped layer.  I adhered the banners and popped it up with some foam tape.  Add in a few yellow enamel dots, and I'm done!


I like how this turned out--what do you think?  Thank you so much for stopping by today!  Have a fabulous and crafty week!


Copic markers:
C00, C1, C3, E29, E27, E25,
YG67, YG17, YG25, YG23, YG03, YG01,

Monday, June 1, 2020

Just A Note to Say Hi! | Art Impressions

Hello friends!  Today I have a sweet card to just say, "Hi!" to that someone special that may need some happy mail!  I've used the beautiful Exclusive Hydrangeas set by Art Impressions that's available at Scrapbook.com.  My hydrangeas are pink with green in the middle because, in my part of Texas, we have alkaline soils and water, not acidic that makes them a blue shade.  Keep reading to see a photo that I took a few days ago of my hydrangea in my backyard.  I love hydrangeas and my photo was my inspiration!


I stamped the hydrangeas in my favorite Copic safe ink--Inkon3 Blackout Detail ink onto some Neenah Solar White 80# card stock.  I've listed my marker colors below.  (Make a note of how few markers I used--LOL!)  When I finished my coloring, I used a Rectangle Double Stitched die to cut it out.  I added some Apple Green Nuvo Crystal Drops to the flower centers and set it aside to dry.


Here is my backyard photo!  It's an older bloom, therefore, not as much green in it as what I colored.


So, onto my card!  I started with an A2 card base and added a black card stock and pink gingham layer and adhered it to the card base.  I added another black layer to the die cut hydrangeas panel.  I stamped one of the several sentiment from this set at the bottom of this panel in Versafine Onyx Black ink.  I added foam tape and adhered it to the card.


Thanks for stopping by today!  Now you know about my love for hydrangeas and also, this beautiful stamp set!  Happy crafting!


Copic markers I used:
G85, YG63, G43, RV21, RV10, RV00

Supplies:

Thursday, May 28, 2020

Hello Beautiful! - Floral Shaker Card

Hello beautiful friends!  Today I have a sweet shaker card using the Honey Bee Stamps Spring Bouquet Honey Cuts along with a few other of their products.  I've also been wanting to use some of the many sequins mixes I've been hoarding, um I mean accumulating!  LOL!


I began by creating the frame for the shaker portion.  I aligned the two largest A2 Double Stitched Frames Honey Cuts together, centering the smaller one inside the larger one.  I taped them together with some purple tape.  I believe I die cut about six of these from white card stock.  The number you need will depend upon the thickness of your shaker bits.  I glued five of them together and put a large stamp block on them to keep the frame flat while the glue dried.  Next I inked up the Woodgrain Background stamp with light gray ink and stamped the remaining frame.

Next I used some heat-resistant acetate and stamped the sentiment in Versamark clear embossing ink. The sentiment is from the Thanks A Bunch set.  I added white embossing powder and heat set it.  Make sure you let your heat gun warm up for about ½ minute and melt the embossing powder by applying the heat for just a few seconds at a time.  Trim the acetate to fit the frame and adhere with some 1/8" Scor-Tape.  Add more Scor-Tape onto the acetate and adhere the woodgrain stamped frame.  Turn the frame over and add the yellow sequin mix from the Rainbow Deluxe Sequin Set.  Next I adhered some patterned paper from The Bee's Knees 6x6 paper pad onto the back of the frame.  Next I adhered the shaker to a top-folding A2 card base.


Next die cut the flowers and leaf branches from patterned paper from the Spring Lullaby 6x6 paper pad.  I decided to color the leaf branches with a couple of Copic markers for some dimension.  The flower centers are from a scrap of patterned paper from The Bee's Knees paper pad.  I also die cut a few flowers from white card stock.  I used the Flower Shaping Kit tools to add dimension to to them.  I used liquid glue to adhere the flower layers together.


To finish up the flowers (and use more "saved" bling) I added some yellow enamel dots from the Spring Fling set to the flower centers.  I just love how Honey Bee's patterned papers and embellishments from different sets can be mixed and matched!  Now all that's left to do is arrange the flowers and branches using liquid glue to adhere them.


So, remember to use all the bling!  That just means you can totally justify buying more bling!  Haha! Thank you so much for stopping by!  I hope your days have been, and will be, safe, happy and crafty!


Supplies:

New Tea Circlet Mini Try-Fold | Art Impressions

Hello friends!  We are beginning week two of the All Layered Up challenge over at Art Impressions.  For my inspiration card, I used the so sweet and new Tea Circlet MTF!


I followed the directions on the packaging to create my card base.  Next, follow the directions for stamping and using the included die cuts to cut the openings.  I colored the images with my Copic markers (colors listed below.)  Yes, the Copic coloring does show as the card is opened, but it really doesn't bother me at all.


I added some pretty patterned paper for my layering using a pencil to trace the openings and then die cutting them.  The sentiment on the card front is from the WC Sentiments set.

I thought that sentiment went well with the one that's part of the stamp on the inside of the card.


Thank you for stopping by today!  I hope to see your entry in the All Layered Up challenge over at Art Impressions!!

I'm also entering this card in the Coffee Loving Cardmakers blog hop:


Copic markers:
E11, E13, BG07, BG53, BG000, C00, C0, C1, C2, C3,
R35, R43, R43, RV21, YG25, YG03, YG01, Y15, Y13, Y11

Supplies: