Monday, May 18, 2020

Coffee Gift Card Holder for the Guys! | Art Impressions

Hello my friends!  Today I have a gift card holder for our guys!  I've used Art Impressions' Coffee Gift Card Holder set to create my card.  Raise your hand if you are like me and struggle with those masculine cards!! Haha!  When I ask my husband his favorite color, he responds with brown!!  LOL! So, I created this card with that male perspective in mind!


Here are the steps to make this card:
  • Create a top-folding A2 card base from Neenah Solar White card stock.
  • Die cut patterned paper using the largest Rectangle Double Stitched die and adhere to the card base.
  • I stamped a coffee bean background with a stamp from my stash with Gathered Twigs Distress Oxide ink.
  • Die cut the stamped background with the second largest Rectangle Double Stitched die.  Adhere at an angle on the card front.
  • Die cut the Coffee Gift Card Holder cup, insert, and lid from Neenah card stock.  Ink the edges of the cup and top of lid with Ground Espresso Distress Oxide.
  • Die cut the coffee cup sleeve from coordinating patterned paper.  Adhere to the cup.
  • Stamp the sentiment onto the cup with Ground Espresso.  I used my MISTI and stamped it a few times to make it darker.
  • Next, die cut the included scalloped circle die from white card stock and ink the edges with Ground Espresso.  I used a Circle Double Stitched die to cut the patterned paper center and adhered the two together.
  • Add a foam square to the circle and pop it onto the coffee cup sleeve and glue the cup to the card front.


I don't have a gift card to display, but I did stamp the other sentiment group from this set on the insert.  Then just check the boxes that fit your occasion!  How fun for the recipient when he removes the gift card!


To finish, I embellished the card with some twine, a button, and enamel dots from my stash.  This I call "guy bling!"  Haha!


So, what is your guy's favorite color?  Is it brown too?  I hope I've inspired you with this masculine card today--Father's Day is next month!  Thanks so much for stopping by and I hope you have a wonderful, crafty week!


Supplies:
Distress Oxide inks: Gathered Twigs, Ground Espresso

Sunday, May 17, 2020

See Through Floral Card | Rubbernecker Stamps

Hello my friends! I have a cool technique that I tried for my floral card today!  I've used the beautiful Fragrant Blooms stamps and coordinating dies to create a floral see-through card.  This was so fun and not at all hard to create!


In full disclosure, the technique for this design totally comes from the awesome Jennifer McGuire.  She has some good tips that make this easy to create (see her YouTube here.)

Here are the details for my card:
  • Stamp a lot of the flowers and greenery from the Fragrant Blooms set.
  • Stamp the purple flowers:  Lavender, Orchid, and Magenta from Color Fuse Set #6.
  • Yellow flowers: Lemon, Custard, and Autumn from Color Fuse Set #1.
  • Pink flowers: Rose, Bubblegum, and Fuchsia from Color Fuse Set #5.
  • Greenery:  Moss and Basil from Color Fuse Set #10.  I stamped the lightest color, Moss, on the tops of the greenery.  Then stamped the darker color, Basil.
  • Stamp the flower centers.  I used Apricot from Color Fuse Set #2 for the yellow flowers.
  • Since I stamped the pink and purple flowers third layer with the darkest ink, I needed to think of something for the centers.  I remembered some yellow embossing powder I've had in my stash forever!  I stamped the centers with Versamark clear embossing ink, sprinkled on the yellow embossing powder and heat embossed it.
  • For all of the stamping, I used my MISTI and stamped the layers 2-3 times, depending upon the depth of color I was wanting.
  • Die cut all of the images with the coordinating dies.
  • Arrange the pieces on an A2 sized card stock.  Do not adhere!
  • Let some of the flowers and leaves hang over the edges making sure that the pieces are overlapping as you go.
  • When you have them arranged, take a piece of Press N Seal and put it over your arrangement and press down to stick them all on.  Using the A2 card stock piece as a guide, trim off the flowers and greenery that extend beyond the edges.  (Note: You will be trimming the Press N Seal too.)  
  • Flip this over and remove the A2 card stock piece.  Add dots of glue under the areas that overlap to connect all the pieces.
  • Remove the Press N Seal and add dots of glue to the overlapping pieces on the front side.
  • Die cut more of both flowers from white card stock.  Glue these to the backside of the piece to give it a cleaner look when it's opened.  You can see the overhang on this next photo--trim that off.
  • Cut a piece of white card stock to 4-¼" x 6".  Score it at ½" and fold over.
  • Adhere the flap to the top part of the see-through card front.  See the next photo as more explanation.


I almost forgot--I added some Ripened Pumpkin Nuvo Crystal Drops to the yellow flowers' centers.  They were missing something, I thought, and now they coordinate better with the other heat embossed centers.



I stamped the sentiment that's from the same set in Versafine Onyx Black ink and fussy cut it out.  I added a few foam squares and adhered it to the card front.


I love how this turned out and it's a fun and different way to use die cut florals!  Thanks so much for stopping by today!


Thursday, May 14, 2020

Bright & Cheery Thanks! | Honey Bee Stamps

Hello my friends!  I love bright colors, stenciling and texture paste and this cheerful card sure covers that!  I've used Honey Bee Stamps awesome Flower Builder background stencils for my card, along with a few other stamp and die sets.


These are the steps for the stenciled background:
  • First, I sprayed the back of both stencils from the Flower Builder background stencil set with Pixie Spray.  This makes stenciling SO easy!
  • I put the flower petal stencil onto a piece of Neenah Solar White card stock and blended Squeezed Lemonade Distress Oxide ink through it with a Background Blender brush.
  • Next I lined up the flower center stencil.  These stencils have etched lines on them that are A2 sized and make it very easy to line up the layers.  I inked Ground Espresso Oxide with a Blender Brush.
  • The next step is to put the flower petal stencil back over the flowers and then spread some clear glossy texture paste through the stencil.  I used some that I've had in my stash forever!
  • Set this aside to dry.
  • When the piece was dry, I used a blender brush and green ink to color the background.  How fun is it that the clear texture paste resists the ink?!  Once I finished the inking, I used a dry clean towel to buff the green ink off of the flowers.



For the dimensional flowers I repeated the stenciling steps above with the Distress Oxide inks, but no texture paste this time.  I lined up the Flower Petal Cover Plate die with the flowers and ran it through my die cutting machine.  I picked out a few flowers to use and inked up the edges of them with Mustard Seed Distress Oxide for dimension.  Then I used some flower shaping tools to form them into a cupped shape.  I used a leafy branch die from the Spring Bouquets die set to die cut several branches from white card stock.  I used my Copics to color them to coordinate and shaped them with the flower shaping tools.  I found some brown sparkly stuff in my stash and added it to the centers for a touch of sparkle.


To assemble the card, I trimmed the stenciled piece to a  5-¼" x 4" and die cut a rectangle in the center of it with an A2 Double Stitched Frames die.  Adhere this to a top folding card base.  I die cut a sentiment from the Grateful Heart die set cutting the "thanks" three times and adhered the layers together.  I die cut the shadow for it from black card stock and adhered the letters to it.  I love this die and the beautiful font!  Before I adhered the leaves, flowers and Thanks, I needed to position them all so I could decide where to stamp the rest of the sentiment.  After I arranged them and the Thanks, without gluing, I took a photo of my arrangement to remember it.  Then I did stamp surgery on the sentiment from the Grateful Hearts stamp set, and positioned those.  I set the card into my MISTI, removed the floral pieces and picked up the stamps with the MISTI door.  I used Versafine Onyx Black ink to stamp it.

  Now it's just a matter of using the photo and adhering the flowers, leaves and Thanks into place--I could fiddle with this for a long time--LOL!  I didn't need to since I had taken the photo and need to remember to do this more often!


I hope that you've enjoyed my bright and cheerful card today!  Stay safe--stay crafty!!

Supplies:
Honey Bee Stamps products:
Spring Bouquets dies (for the leafy branch)

Other supplies:
Pixie Spray

Monday, May 11, 2020

Cruisin' By | Art Impressions

Happy Monday friends!  Today I have a card featuring the fun Art Impressions' Enjoy The Ride set.  This stamp reminds me of the warm spring and summer days and enjoying the outdoors.  This is wonderful for sending to someone "just because"!


This card was really quick and easy to make!  I die cut the tag from Neenah Solar White 80# card stock with the tag from the Tag Stitched Dies set.  Next I stamped the bicycle onto it with Copic safe ink and colored it with my markers.  The colors I used are listed below.  When I finished the coloring, I stamped the sentiment (it's one of seven included in the set) in Versafine Onyx Black ink.  

I created my card base with a top-folding A2 card base.  I adhered a floral patterned paper that I trimmed to 4" x 5-¼".


I hand cut a patterned paper layer to go behind the tag.  I did that by using a pencil to trace around the actual die on the patterned paper.  I trimmed the straight edges with my paper trimmer and fussy cut the rounded corners.  I adhered this to my colored image.  I added foam tape to the back of the tag.  Before adhering the tag to the card base, I tied on some ribbon from my stash.


I love how this turned out and I hope I've given you some inspiration for your cards today!  Have a wonderful, safe, and crafty week!


Copic markers:
B0000, B000, B00, B41, B24, B32, B37, B45,
C00, C1, C3, N4, N6, N8, R05, R08, R21,
Y02, Y18, YG01, YG03, YG17, YR27, YR31

Supplies:





Sunday, May 10, 2020

One Sweet Stamp, Three Ways | Rubbernecker Stamps

Hello Rubbernecker friends!  Today I'm using just one sweet stamp with its coordinating die, to make three sweet cards!  I've used the Tree with Bench Swing stamp to create one clean and simple card, plus two more that are a bit more involved.  It didn't take me very long at all to put these together!


All three cards are top-folding A2 card bases made with Neenah Solar White 80# card stock.  For each card, the swing image is colored with Copic markers.  Also, I've added some clear acrylic hearts to each card for a touch of bling!  This first card is my CAS card, which let me tell you, is WAY out of my comfort zone!  Haha!


Card directions:
  • Die cut white card stock with the largest Nested Inside Scallop die.
  • Blend Beachside ink, from Color Fuse Set #9, in the center with an ink blending brush.
  • Add some thin foam tape to the back and attach it to the card base.
  • Add foam squares to the back of the colored and die cut swing and adhere it to the card front.
  • Stamp the sentiment from the Kittie Says Phrases #1 with Versamark clear embossing ink onto black card stock.  (Don't forget to use your anti-static bag first!)
  • Sprinkle with white embossing powder and heat set.
  • Trim the sentiment and adhere it to the card with foam squares.


For this next card I created an ombre striped background to go behind the tag.


Card directions:
  • Ink up the Horizontal Stripes background stamp with each color from Color Fuse Set #9 in an ombre pattern.  I used a clean paper towel as I went along to dab the edges of each ink color to eliminate any harsh lines.
  • I used a MISTI stamp positioner and stamped it a couple of times until I was happy with my stamping.
  • Die cut the striped panel with the largest Nested Rectangle Small Stitched die and adhere it to the card base.
  • Die cut one tag from the Nested Tag Stitched dies.  Ink up the center with Beachside ink from Color Fuse Set #9.
  • I died some white ribbon to coordinate and tied it onto the tag. (see photo below)  To die the ribbon, I smooshed some ink onto my glass mat and spritzed the ribbon and ink with a bit of water.  Swirl the ribbon around to absorb the ink and set aside to dry.
  • Adhere the swing to the tag.
  • Stamp the sentiment Kittie Says Phrases #1 in black ink.
  • Adhere the tag to the card front with foam tape.

Die your own ribbon!

My final card is just a bit more detailed, but definitely easy to make!


Card directions:

  • Ink up the Branch Shadow background stamp with Fern ink from Color Fuse Set #11 and stamp onto a 4-¼" x 5-½" white card stock.  Trim to 4" x 5-¼".
  • Using the coordinating swing die, position it on the card front and run through your die cutting machine. (Photo #1 below.)
  • Die cut the swing in the stamped Branch Shadow piece.  I did this by placing it inside the card base and taping them together with temporary tape.  (See Photo #2.)  Place the die on the previous die cut opening on the card front.  Make sure your card base is not folded before you run it through your die cutting machine.
  • This step very easy when using a stamp positioner such as the MISTI.  Stamp the swing on the inside of the card by closing up your card base.  Center the stamp in the die cut opening, then pick up the stamp with the positioner door.  
  • I did a test by placing some scrap paper in and stamping onto it first to make sure I had the stamp centered.
  • Remove the scrap paper and stamp the swing onto the inside of the card.
  • Color the swing and stamp the sentiment in black ink.  This sentiment is from the Best Friends set.
  • Adhere the Branch Shadow piece to the card front making sure to line up the die cut openings.
  • Stamp the sentiment from Best Friends in black ink.
   

I love how you get a peak at this adorable swing and then see the full scene when you open the card!


Oh, I forgot to add that I used a black .05 Micron pen to draw around the die cut opening.  I think it brings more definition and attention to it this way.


Thank you so much for stopping by!  I hope you've found some inspiration here for using this sweet stamp!  Have a wonderful and crafty week!


Rubbernecker products used:

Thursday, May 7, 2020

Invitation Set with Greenery Invites | Art Impressions

Hello friends!  Today I'm happy to be the feature designer for today's new challenge over at Art Impressions.  The new challenge is called "You're Invited" and the new Greenery Invites set is just perfect for this one!



Here are the beginning steps for this set:
  • Trim Neenah Solar White 110# into three pieces--two at 4-¼" x 2-¾" and another to 4" x 5-¼".  I recommend using the 110# card stock so the warping isn't too bad when heat embossing.
  • Stamp the wreath onto the 4" x 5-¼" card stock with Copic safe ink.
  • Stamp the greenery onto the two smaller cards.
  • Color the images with Copic markers.  My colors are listed below.
  • After my coloring was done, I decided to stamp the berry branch randomly around the wreath.
  • Die cut some gold metallic card stock with Altenew Fine Frames Cover die  and the Altenew Fine Frames Rectangle die twice.  Adhere the two pieces together for each frame.  Set aside to dry.
  • Emboss the sentiments onto the cards by stamping with Versamark and sprinkling on the embossing powder.  I used a black embossing powder.  If you do, be sure to use that anti-static bag thoroughly to eliminate the black specks.

To finish up I adhered the gold frames.  I added foam tape to the back of the larger card and adhered it to a top-folding A2 card base.



I thought the berries needed some dimension, so I added some Ebony Black Nuvo Crystal Drops to each one.  I also added a few drops to the other cards to tie the theme together even more.



There are so many ways to use this set!  I didn't use all the images included, and also, there's a "thank you" sentiment so you can make beautiful thank you cards with this set too!  Thank you so much for stopping by and I hope you'll join in this new challenge!



Copic markers:
rounded leaves:  G46, YG45, G12, YG41, YG11
oblong leaves:  G17, G05, G02

Monday, May 4, 2020

Best Friends Forever! | Art Impressions

Happy Monday friends!  Today I have a fun card that would be perfect for sending to all of our friends that we miss so much!  I've used Art Impressions' new We're Here Set for this card.



I began by stamping the image onto white card stock that I die cut with a Rectangle Double Stitched die.  I also stamped it onto some masking paper and fussy cut it out.  I used the Copic markers listed below to color the image.  I used a white gel pen to add details to the blue sweater.  I found a "Home" stamp in my stash and stamped it onto the door sign.



For the background, I put the mask over the image and taped off the die cut edges.  I used a rectangle masking stencil and a blender brush to add Squeezed Lemonade Distress Oxide ink.  I used a black pen to draw a line to separate the floor and wall and used some Post-It Tape to mask the floor.  Next I used a brick stencil to ink on more Squeezed Lemonade ink.  I blended a bit of Mustard Seed Distress Oxide around the edges.

After removing the masks, I layered the panel onto some blue card stock and some black/white patterned paper.  I adhered these layers to a top-folding A2 card base.  I stamped the sentiment onto some of the blue card stock and die cut it with the smallest Rectangle Double Stitched die.  I shifted the die cut piece in the die and ran it through my machine again to make it shorter.  I repeated this for the other end.  I popped the sentiment up with some foam tape.



Thanks so much for stopping by today!  Have a wonderful, crafty week!


Copic markers:
BG000, BG01, BG11, BG13, BG15, BG18,
C00, C1, C3, E07, E08, E13, E15, E21, E23,
E25, E27, E31, E39, E50, E51,
N5, N7, N9, R20, R35, RV02, RV04,
T3, T5, T9, Y00, Y06, Y13, Y15, Y28,
YR20, YR21, YR23, YR24,
YG17, YG25, YG67

Supplies:
Distress Oxide Inks: Squeezed Lemonade, Mustard Seed